Hostacom TRC 1193N 100I BLACK is high melt flow, 1,900 MPa flexural modulus, low density thermoplastic polyolefin (TPO) resin. It has an excellent balance of processability, rigidity, impact, scratch and mar resistance. It is typically used for injection molding of Instrumental Panels and other interior trim parts or components with good surface appearance properties.
Hostacom TRC 1193N 100I BLACK
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 20 g/10 min |
| Density (23 °C) | 0.99 g/cm³ |
| Flexural Modulus | 1900 MPa |
| Tensile Stress at Yield | 19 MPa |
| Tensile Strain at Yield | 6 % |
| Notched Izod Impact Strength (23 °C) | 45 kJ/m² |
| Notched Izod Impact Strength (-30 °C) | 8 kJ/m² |
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 107 °C |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Instrument Panels, Interior Automotive Applications
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications